חיפוש
קטגוריות
    Menu Close

    222mm FPV Racing Drone Frame Carbon Fiber Stretch-X Quadcopter Frame Kit 4mm Arm for QA/V XS with PDB Power Distribution Board and LiPo Battery Strap

  • ★Features an X design which is currently the most popular mini quad layout,light weight,super stiff,finely tuned airframe designed for high performance FPV Drone Racing. In addition,support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc)
  • ★Full 3K Carbon Fiber airframe featuring a solid 4mm main plate, all screws are premium, black oxide steel, The airframe comes with high quality power distribution board and 25cm fpv drone battery strap,the lipo battery strap can hold your battery well
  • ★The main "unibody" 4mm plate is CNC milled out of a solid sheet of premium carbon fiber.The top plate includes an antenna SMA mounting hole, and cable tie holes allowing you to lock down your antenna in place
  • ★"Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250,with LiPo battery protection plate,and easy grip black anodized spacers
  • ★The installation of the camera is a little complicated, please be patient,if you have any problems please contact us
  • קח אותי לאמזון

    ** שימו לב, במקרים מסוימים חישוב המכס של אמזון מוטעה כלפי מעלה, במקרים אלו אמזון תזכה את חשבונכם רטרואקטיבי **
    ספק: FPVDrone
    זמינות: 10 קיים במלאי
    ₪ 127.64
    Features:
    Full 3K Carbon Fiber airframe featuring a solid 4mm main plate.
    Dual purpose FPV and HD camera mounting solution.
    Stretch-X Compact size for 5" propellers, 222mm motor to motor.
    The standoff size is M3*28mm
    Black Oxide steel screws
    Easy grip black anodized spacers
    "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
    LiPo battery protection plate included.
    Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
    Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
    Lightweight and rigid
    Compatible with Lumenier Race Pod.

    Recommanded Spare Parts: Not included
    Brushless motor:1806-2206(KV2000-2300)
    Brushless ESC:12-30A
    Flight Controller: Mini CC3D/Naze32
    Propeller:5030,5040,5045
    VTX:5.8G 200-600mW 32CH
    Antenna: Clover antenna/ 14DB flat antenna/ mushroom antenna
    Package Included:
    1x222mm Carbon Fiber frame kit
    1xPower distribution board
    1xFPV Drone Battery Strap 250mm
    This is a installation link: https://youtu.be/naiK3Dln6oM if you have problems with putting it together,you can have a check of this video.

    Features:
    Full 3K Carbon Fiber airframe featuring a solid 4mm main plate.
    Dual purpose FPV and HD camera mounting solution.
    Stretch-X Compact size for 5" propellers, 222mm motor to motor.
    The standoff size is M3*28mm
    Black Oxide steel screws
    Easy grip black anodized spacers
    "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
    LiPo battery protection plate included.
    Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
    Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
    Lightweight and rigid
    Compatible with Lumenier Race Pod.

    Recommanded Spare Parts: Not included
    Brushless motor:1806-2206(KV2000-2300)
    Brushless ESC:12-30A
    Flight Controller: Mini CC3D/Naze32
    Propeller:5030,5040,5045
    VTX:5.8G 200-600mW 32CH
    Antenna: Clover antenna/ 14DB flat antenna/ mushroom antenna
    Package Included:
    1x222mm Carbon Fiber frame kit
    1xPower distribution board
    1xFPV Drone Battery Strap 250mm
    This is a installation link: https://youtu.be/naiK3Dln6oM if you have problems with putting it together,you can have a check of this video.

    Features:
    Full 3K Carbon Fiber airframe featuring a solid 4mm main plate.
    Dual purpose FPV and HD camera mounting solution.
    Stretch-X Compact size for 5" propellers, 222mm motor to motor.
    The standoff size is M3*28mm
    Black Oxide steel screws
    Easy grip black anodized spacers
    "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
    LiPo battery protection plate included.
    Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
    Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
    Lightweight and rigid
    Compatible with Lumenier Race Pod.

    Recommanded Spare Parts: Not included
    Brushless motor:1806-2206(KV2000-2300)
    Brushless ESC:12-30A
    Flight Controller: Mini CC3D/Naze32
    Propeller:5030,5040,5045
    VTX:5.8G 200-600mW 32CH
    Antenna: Clover antenna/ 14DB flat antenna/ mushroom antenna
    Package Included:
    1x222mm Carbon Fiber frame kit
    1xPower distribution board
    1xFPV Drone Battery Strap 250mm
    This is a installation link: https://youtu.be/naiK3Dln6oM if you have problems with putting it together,you can have a check of this video.

    *
    *
    *
    *
    Features:
    Full 3K Carbon Fiber airframe featuring a solid 4mm main plate.
    Dual purpose FPV and HD camera mounting solution.
    Stretch-X Compact size for 5" propellers, 222mm motor to motor.
    The standoff size is M3*28mm
    Black Oxide steel screws
    Easy grip black anodized spacers
    "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
    LiPo battery protection plate included.
    Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
    Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
    Lightweight and rigid
    Compatible with Lumenier Race Pod.

    Recommanded Spare Parts: Not included
    Brushless motor:1806-2206(KV2000-2300)
    Brushless ESC:12-30A
    Flight Controller: Mini CC3D/Naze32
    Propeller:5030,5040,5045
    VTX:5.8G 200-600mW 32CH
    Antenna: Clover antenna/ 14DB flat antenna/ mushroom antenna
    Package Included:
    1x222mm Carbon Fiber frame kit
    1xPower distribution board
    1xFPV Drone Battery Strap 250mm
    This is a installation link: https://youtu.be/naiK3Dln6oM if you have problems with putting it together,you can have a check of this video.

    Features:
    Full 3K Carbon Fiber airframe featuring a solid 4mm main plate.
    Dual purpose FPV and HD camera mounting solution.
    Stretch-X Compact size for 5" propellers, 222mm motor to motor.
    The standoff size is M3*28mm
    Black Oxide steel screws
    Easy grip black anodized spacers
    "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
    LiPo battery protection plate included.
    Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
    Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
    Lightweight and rigid
    Compatible with Lumenier Race Pod.

    Recommanded Spare Parts: Not included
    Brushless motor:1806-2206(KV2000-2300)
    Brushless ESC:12-30A
    Flight Controller: Mini CC3D/Naze32
    Propeller:5030,5040,5045
    VTX:5.8G 200-600mW 32CH
    Antenna: Clover antenna/ 14DB flat antenna/ mushroom antenna
    Package Included:
    1x222mm Carbon Fiber frame kit
    1xPower distribution board
    1xFPV Drone Battery Strap 250mm
    This is a installation link: https://youtu.be/naiK3Dln6oM if you have problems with putting it together,you can have a check of this video.

    Features:
    Full 3K Carbon Fiber airframe featuring a solid 4mm main plate.
    Dual purpose FPV and HD camera mounting solution.
    Stretch-X Compact size for 5" propellers, 222mm motor to motor.
    The standoff size is M3*28mm
    Black Oxide steel screws
    Easy grip black anodized spacers
    "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
    LiPo battery protection plate included.
    Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
    Support to carry HD camera at 35 degree angle(such as the GoPro 4, Mobius, etc).
    Lightweight and rigid
    Compatible with Lumenier Race Pod.

    Recommanded Spare Parts: Not included
    Brushless motor:1806-2206(KV2000-2300)
    Brushless ESC:12-30A
    Flight Controller: Mini CC3D/Naze32
    Propeller:5030,5040,5045
    VTX:5.8G 200-600mW 32CH
    Antenna: Clover antenna/ 14DB flat antenna/ mushroom antenna
    Package Included:
    1x222mm Carbon Fiber frame kit
    1xPower distribution board
    1xFPV Drone Battery Strap 250mm
    This is a installation link: https://youtu.be/naiK3Dln6oM if you have problems with putting it together,you can have a check of this video.

    תגיות מוצר